TETENAL Lavaquick Rinse Aid 1L
$48.00
Lavaquick is a rinse aid for B/W films and papers.
Ideally suited for fibre based papers. Itr educes the washing time by 50 %.
By using Lavaquick, the appearance of stains during the toning of B/W papers is prevented.
Dilution: 1 + 19. Capacity: up to 60 m2
Time required: approximately 120 s.
In stock
SKU: TET-LAVAQUICK-1L
Category: Film Processing Chemicals
Tags: 1L, lavaquick, Lavaquick Rinse Aid, Rinse Aid, TETENAL
Additional information
Weight | 1400 g |
---|
Quickview
CineStill Cs41 Colour Processing Chemicals
Film Processing Chemicals
Processing ANY colour negative film at home is easy with this simple powder chemistry kit from Cinestill!
It is specially formulated without compromise for modern colour films, not requiring a stabilizer bath. Modern emulsions were designed so that one-hour photo labs wouldn't need haz-mat training for formaldehyde, and have built-in dye stabilizers and hardeners that are released through this simplified 2-bath process. You can have beautifully developed, bleached and fixed colour negatives, ready to scan or print. All you need is water, a thermometer and any simple tank and reel system, like this easy-to-use Paterson Tank.
Now available in 2 sizes; 500ml and 1 Litre.
The 1 Litre kit will process up to 24 rolls of 35mm/120 film.
The 500ml kit will process up to 12 rolls of 35m/120 film
Features:
- For processing any colour negative (C-41) film
- Easy to mix concentrates make 1 litre/quart of Developer and Blix (Bleach&Fix combined)
- 2 bath kit (just like most black and white processing)
- No special processor needed (use standard processing tanks and reels like a Paterson Tank)
- Flexible processing temperatures
- Instructions for processing and Push/Pull processing included
- Long lasting shelf life
- Fully archival
- Affordable!
$49.00 – $79.00
Quickview
$12.00
MFS Remjet Remover Solution
Film Processing ChemicalsThis solution is used to soften the Black RemJet layer of Motion Picture Film ready for removal and then development with home C-41 chemistry.
To test the solution, cut the leader/piece of film off and dip in the solution for 10 seconds. Rinse film under running water and the RemJet should wash away. Perfect for use on MFS vision3 films!
Contains:
2x Remjet Remover kit to make 500ml Solution
Quickview
$27.00
Ilford Ilfostop Stop Bath 500ml
Film Processing Chemicals- Ilford Ilfostop is a low odour citric acid stop bath. After development we recommend that films and papers are rinsed in an acid stop bath to stop development immediately and neutralise the developer to help maintain the activity of the fixer bath. It is specifically recommended for dish/tray processing of paper or deep tank processing of film. Ilfostop helps to maintain the activity and prolong the life of the fixer solution by reducing carry over of excess developer (alkaline) into the fixer bath (acidic).
- Ilford Ilfostop - 500 millilitres of developer liquid concentrate.
Quickview
CineStill Cs2 ECN-2 Processing Chemicals
Film Processing Chemicals
After years of research & development, CineStill has now formulated the only safe and consistent way to process stills with the same characteristics Hollywood expects, from the comfort of your home with the Cs2 “Cine Simplified” ECN 2-Bath Kit.
For those who wish to dabble in the motion picture workflow CineStill have formulated some original at-home solutions, which are accurate to Eastman Kodak sensitometric standards. This 2-bath process simplifies the original 10+ step ECN-2 process, with uncompromised quality and accurate characteristic curves, while making it safe and foolproof for at-home use. Any motion or still photography film can be processed in this simplified 2-bath powder kit, resulting in a low-contrast color negative that is suitable for the motion picture workflow and scanning.
CineStill's Cn2 “COLOR NEGATIVE” developer is combined with the prebath accelerant (which kicks off development) to produce proper ECN-2 density. The bleach and fixer baths are combined with the stop and wash baths in our single Bf2 “BLEACH&FIX+STOP” bath, to reduce risks to health & safety and processing defects caused from hazardous chemical carryover. After a final washing of your film you will have CineStill negatives matching Kodak’s characteristic curves for proper motion picture processing.
It may be a less complicated process than ECN-2, but Cs2 is actually more advanced chemistry, utilizing chemical compounds and technology which didn’t exist when ECN-2 was originally designed. ECN-2 was formulated around the mid-1970s, with the available technology of the day. Even though CineStill's Cs2 kit is simplified and safer, they didn’t skip or compromise any of the designed functions of the ECN-2 process. Whether it be with the color developing agents or the combined baths, CineStill don’t settle for incomplete formulas that omit essential active components (e.g. Antifoggant to prevent base-fog buildup, Anti-Calcium to prevent precipitate and contamination, Ammonium Thiosulfate to fully clear silver and dyes, Development Stop to prevent color staining, etc). Proper ECN-2 negatives. No compromises. No BS. CineStill's got you covered.
* Not intend for RA-4 chromogenic printing.
* If rem-jet is present, it can be manually removed under running water, after development.
$77.00