Kodak Indicator Stop Bath 16oz (473ml)
Kodak Indicator Stop Bath 16oz (473ml)
$16.00
Kodak Indicator Stop Bath is a general-purpose stop bath for use with film and papers.
It features a handy exhaustion signal, meaning the solution will turn a bluey-purple colour when exhausted.
Diluted heavily with water, so this bottle will make plenty!
-16oz 473ml bottle.
Out of stock
){kind=link}
Please note:
This product cannot be shipped outside of Australia at this time.
This product cannot be shipped via Express Post.
Additional information
| Weight | 520 g |
|---|---|
| upc |
Quickview
$24.00
Ilford Ilfostop Stop Bath 500ml
Film Processing Chemicals- Ilford Ilfostop is a low odour citric acid stop bath. After development we recommend that films and papers are rinsed in an acid stop bath to stop development immediately and neutralise the developer to help maintain the activity of the fixer bath. It is specifically recommended for dish/tray processing of paper or deep tank processing of film. Ilfostop helps to maintain the activity and prolong the life of the fixer solution by reducing carry over of excess developer (alkaline) into the fixer bath (acidic).
- Ilford Ilfostop - 500 millilitres of developer liquid concentrate.
Quickview
Kodak XTOL Black & White Developer (Makes 5L)
Film Processing Chemicals
KODAK Professional XTOL Developer is a two-part powder developer for processing KODAK and other manufacturers’ normally exposed, pushed, or pulled black-and-white films.
It offers full emulsion speed and easy mixing, and can be used as both a developer and a replenisher in a variety of equipment, from small tanks, trays, or rotary tubes to high-volume processors.
- Easy mixing at room temperature
- 2 part powder, just mix with water.
- Makes 5L of developer (1.32 US Gallons)
- Brand new, direct from Kodak
- Long lasting
- No nasty hydroquinone
- Good shelf life
- For further info, check out the Kodak Data sheet here.
This developer chemical is not a dangerous or hazardous good, and thus can be shipped normally as any other item.
$20.00
Quickview
$7.00
Ilford Simplicity Wetting Agent – Single Pack
Film Processing Chemicals- For 8x 120 or 16x 35mm Rolls of Film
- ILFOTOL Wetting Agent
- Reduces Water Spots on Film
- Used During Final RinseThe Ilford Simplicity Wetting Agent is non-ionic wetting agent used as a final rinse before drying films. It can be used in all manual and machine processes to greatly reduce the risk of drying marks being formed. It can also be used as a final rinse before drying fibre based prints to provide rapid, even drying.
How to Use
Simply pour the full contents of the dev, stop and fix sachets into separate measuring containers, dilute each one to 600ml with water at the correct temperature, stir to ensure they are mixed and then you are ready to use as part of the normal dev, stop, fix and wash sequence. At the end of the wash sequence add 2 cap-fulls of the wetting agent to the tank and give five inversions before removing the films.
Quickview
CineStill Cs41 Colour Processing Chemicals
Film Processing Chemicals
Processing ANY colour negative film at home is easy with this simple powder chemistry kit from Cinestill!
This kit makes it easy to process C-41 colour negative film at home.
It is specially formulated without compromise for modern colour films, not requiring a stabilizer bath. Modern emulsions were designed so that one-hour photo labs wouldn't need haz-mat training for formaldehyde, and have built-in dye stabilizers and hardeners that are released through this simplified 2-bath process. You can have beautifully developed, bleached and fixed colour negatives, ready to scan or print. All you need is water, a thermometer and any simple tank and reel system, like this easy-to-use Paterson Tank.
Features:
- For processing any colour negative (C-41) film
- Easy to mix concentrates make 1 litre/quart of Developer and Blix (Bleach&Fix combined)
- 2 bath kit (just like most black and white processing)
- No special processor needed (use standard processing tanks and reels like a Paterson Tank)
- Flexible processing temperatures
- Instructions for processing and Push/Pull processing included
- Reusable for up to 24 rolls of film
- Long lasting shelf life
- Fully archival
- Affordable!
$55.00